The 3D Bubble Candle Silicone Mould from Azlok lets you cast the popular cube-shaped bubble candle at home in a single pour. You melt wax, add fragrance and colour, pour it into the flexible silicone cavity, let it set, and peel the mould away to reveal a glossy sphere-cluster candle. It is reusable, food-grade-style silicone, and currently comes as a Buy 1 Get 1 Free pack, so you can pour two candles side by side.
What you can make with it
This mould shapes the overlapping-balls or "bubble cube" design that has become a favourite for gifting and home styling. Beyond candles, the same silicone works for a few small craft projects.
- Decorative pillar candles for shelves, dining tables and pooja corners.
- Scented candles using fragrance or essential oils.
- Wax melts and soy candles for a softer, cleaner burn.
- Plaster or resin bubble ornaments if you like mixed craft work.
How to make a bubble candle
The process is simple even if this is your first candle. Keep everything ready before you start, because wax sets faster than you expect.
- Prepare the wick. Thread a cotton or pre-tabbed wick through the centre of the mould base. If your mould has no wick hole, insert the wick after pouring, once the wax begins to thicken.
- Melt the wax. Use a double boiler. Soy wax melts around 60–70°C and paraffin a little higher. Never heat wax directly on a flame.
- Add colour and fragrance. Stir in dye chips and fragrance oil once the wax is off the heat and slightly cooled, usually around 55–60°C. Follow the fragrance dosage on its label.
- Pour slowly. Fill the mould in a steady stream to reduce air bubbles. Tap the sides gently to release trapped air.
- Set and unmould. Let it cure at room temperature for 4–6 hours, or longer for large pours. When fully firm, flex the silicone and peel it back gently. Trim the wick to about 1 cm before lighting.
Tips for a clean, glossy finish
- Pour at the right temperature. Too hot causes shrinkage cracks; too cool leaves a rough top.
- Warm the mould slightly with a hairdryer before pouring for a smoother surface.
- Do a second top-up pour if a dip forms around the wick as the candle cools.
- Let candles cure a day or two before burning so the fragrance settles.
Safety notes
Candle making involves hot wax, so treat it with respect. Melt wax over indirect heat and never leave it unattended. Work in a ventilated space, especially when handling fragrance oils. Keep the mould, wax and finished candles away from small children and pets. When burning the candle, place it on a heat-resistant surface, keep it away from curtains, and never leave a lit flame unsupervised.
Buying and storage
The Azlok mould measures roughly 6 x 6 x 5 cm and weighs about 110 grams, made from durable white silicone that flexes without tearing. It is made in India and sold in value packs, from Buy 1 Get 1 Free at ₹149 up to larger Buy 6 Get 6 Free combos if you make candles regularly or run a small business. After each use, wash the mould with warm water and mild soap, dry it fully, and store it flat away from direct sunlight and sharp objects. Cared for well, silicone moulds last through many pours.
FAQ
What wax works best in this bubble candle mould?
Soy wax is popular for its clean burn and easy release, but paraffin and beeswax blends also work. Pick a container or pillar wax suited to moulded candles and follow the melting temperature on its packaging.
How do I get the candle out without breaking it?
Let the wax cure completely first. Then gently flex and roll the silicone away from the candle rather than pulling the candle out. Chilling the mould in the fridge for a few minutes can help stubborn releases.
Can I reuse the silicone mould?
Yes. Silicone is reusable many times. Just clean and dry it after each use and store it flat so it keeps its shape.
Do I need to grease the mould before pouring?
Usually no. Silicone releases wax naturally. For extra insurance you can lightly wipe the inside with a thin coat of oil, but wipe away any excess so it does not affect the surface.
Is this mould only for candles?
Candles are the main use, but the same mould can cast wax melts, plaster or resin decor items. Avoid using the same mould for food if you have used it with fragrance oils, dyes or resin.