The Azlok 6 Flower Pattern Rectangle Mold and Bath Bomb Mold combo is a two-piece set for making decorative soaps and round bath bombs at home. It pairs a 6-cavity silicone soap tray, which shapes neat floral bars, with a durable aluminium sphere mould that presses fizzing bath bombs into shape. Both are reusable and release easily, making them handy for hobbyists and small handmade businesses.
What you get in the combo
This pack from Azlok includes two moulds so you can work on soaps and bath products with a single purchase:
- Flower pattern soap mold: a silicone tray measuring roughly 18.4 x 18.4 cm with six flower-shaped cavities. Silicone flexes, so bars pop out cleanly without chipping the design.
- Bath bomb mold: a round aluminium mould about 2 inches across, which gives a firm, even sphere when you pack the mixture properly.
It comes in a 1 Pack or 2 Pack option. Colours may vary, and if your chosen colour is out of stock, an alternative colour mould will be sent.
How to make flower soaps
The silicone mould works well with melt-and-pour and cold-process soap alike. For a quick start with melt-and-pour:
- Cut your soap base into cubes and melt gently in a microwave or double boiler until just liquid.
- Stir in a few drops of skin-safe fragrance or essential oil and a little colour if you like.
- Pour into the six flower cavities, filling to the top. Tap the tray lightly to release trapped air bubbles.
- Let the soaps set at room temperature for a few hours, or refrigerate to speed things up.
- Once fully firm, flex the silicone and push each bar out from the base.
How to make round bath bombs
The aluminium sphere mould shapes the classic ball bath bomb:
- Mix your dry ingredients (typically baking soda and citric acid) with a fine mist of oil and water until the blend holds together when squeezed.
- Overfill both halves of the mould so the mixture mounds slightly above the rim.
- Press the two halves together firmly, then gently ease them apart.
- Let the bomb dry undisturbed for several hours before handling.
Work in small batches and keep the mixture on the drier side, as too much moisture starts the fizzing reaction early.
Tips and safety notes
- Patch-test additives: if you add essential oils or fragrance, keep them within recommended usage rates and test on a small skin area first.
- Handle citric acid with care: it can irritate eyes and airways, so work in a ventilated space and avoid inhaling the powder.
- Keep away from children: raw materials and unset products are not for eating or play.
- Mind hot soap base: melted soap can burn, so pour carefully.
- Grease if needed: silicone usually needs no prep, but a light spray helps stubborn cold-process recipes.
Cleaning and storage
Wash both moulds with warm water and mild dish soap after each use. Dry the silicone tray fully to prevent residue, and wipe the aluminium mould dry to avoid water spots. Store them flat, away from direct sunlight and sharp objects, so the flower detailing stays crisp. With reasonable care, both moulds last through many batches. You can pick up soap bases, citric acid, fragrance oils and other supplies from Azlok to complete your kit.
FAQ
Can I use this silicone mould for resin or candles too?
Silicone moulds handle many casting materials, so you can experiment with soy wax or resin. Keep separate moulds for food-adjacent and craft uses, and always follow the temperature limits of your material.
How many soaps does the flower mould make at once?
The tray has six cavities, so you get six flower-shaped bars per pour.
Why does my bath bomb crumble after unmoulding?
Usually the mixture was too dry or not packed firmly enough. Add a touch more oil or a light spritz of water until it clumps when pressed, then pack both halves tightly.
Do I need to grease the silicone mould before pouring?
Not for most melt-and-pour soaps, as silicone releases cleanly. A light coat of release spray can help with denser cold-process recipes.
Is the mould colour guaranteed?
Colours can vary with stock. If your preferred colour is unavailable, an alternative colour mould will be delivered.