An aluminium candle mould is a reusable metal casting that holds molten wax until it sets into a smooth pillar candle. The Azlok Aluminium Candle Mould set gives you four sizes, so you can pour tall, short, slim and chunky pillars from the same batch of wax. Fill, cool, unmould, and repeat.
What you can make with these moulds
These moulds are made for pillar-style candles that stand on their own without a container. Because you get four sizes in one set, you can build a coordinated cluster for a table or mantel.
- Festival and decor candles for Diwali, weddings and pujas.
- Gift candles in scented or coloured wax.
- Practice batches for a small home business, since the moulds are reusable.
- Layered or dyed pillars using different waxes and colours.
The set includes four sizes: 4 x 1.5 inch, 2.5 x 2.5 inch, 2 x 2 inch and 3 x 3 inch, in silver aluminium. Total pack weight is around 200 grams.
How to use an aluminium candle mould
The process is straightforward once you have your wax and wick ready.
- Prepare the wick. Thread a pre-waxed wick through the small hole at the base of the mould. Tie the top end to a pencil or skewer laid across the mould rim so it stays centred, and seal the base hole with mould sealer or a bit of putty to stop leaks.
- Melt the wax in a double boiler to the temperature recommended for your wax type. Add dye and fragrance oil once it is off direct heat, if you are using them.
- Pour slowly down the side of the mould to reduce air bubbles. Leave a little space at the top.
- Let it cool at room temperature. As the candle sets, a dip often forms around the wick, so keep a little melted wax aside for a second top-up pour.
- Unmould once fully cool and firm. Remove the sealer, and the candle should slide out. A short spell in the fridge can help release a stubborn candle.
- Trim the wick to about 1 cm before lighting.
Tips for a clean, professional finish
- Rub a thin film of mould release or light cooking oil inside before pouring to help the candle slide out.
- Pour at the right temperature. Too hot can cause cracks and shrinkage; too cool can leave a rough, patchy surface.
- Cool candles slowly and away from draughts to avoid surface lines.
- Warm the mould slightly with a hair dryer before pouring if your room is very cold.
- Always do a top-up pour to fill the dip around the wick for a level base.
Safety while candle making
Molten wax is hot and flammable, so treat it with the same care as hot oil.
- Never leave melting wax unattended, and keep a lid nearby in case of overheating.
- Work on a heat-resistant surface with good ventilation, especially when adding fragrance oils.
- Handle warm moulds with a cloth or gloves, as aluminium conducts heat quickly.
- Keep children and pets away from your workspace.
- Never pour leftover wax down the drain; let it set and bin it.
Cleaning, care and buying
These moulds are washable and reusable, which is what makes them worth keeping. After the candle is out, wipe away wax residue with a paper towel while the mould is slightly warm. For a deeper clean, wash in warm soapy water, dry thoroughly, and store somewhere dry to prevent water spots. Avoid harsh scouring that could scratch the inner surface, since a smooth interior gives a smoother candle.
The Azlok set is priced at ₹796 and is available as a 1, 2 or 5 combo pack, so you can scale up if you make candles regularly or sell them. It is manufactured in India. If you are just starting out, a single set of four sizes is a sensible way to test which shapes you and your customers like best.
FAQ
What wax works best in aluminium candle moulds?
Firmer waxes such as paraffin pillar wax or a pillar-blend soy wax hold their shape and release cleanly from metal moulds. Very soft container waxes are not ideal for free-standing pillars.
How do I stop the candle sticking to the mould?
Apply a thin coat of mould release or a light oil before pouring, cool the candle fully, and if needed chill it briefly in the fridge so the wax contracts and slides out.
Do I need a special wick?
Use a wick suited to the candle diameter. A wick too thin will tunnel; one too thick may smoke. Match the wick to your widest mould for a clean, even burn.
Can I reuse the moulds many times?
Yes. Aluminium moulds are designed to be reused. Just clean and dry them properly after each pour and store them away from moisture.
Why does my candle have a dip in the middle?
Wax shrinks as it cools, forming a dip around the wick. This is normal. A second top-up pour once the candle has partly set will give you a flat, finished base.