Call us:8800412138
AZLOK - PREMIUM B2C SHOPPING EXPERIENCE
Back to Blog

How to Colour Handmade Soap with the Azlok 5 Soap Color Combo Pack

By System Administrator
July 4, 2026
How to Colour Handmade Soap with the Azlok 5 Soap Color Combo Pack

The Azlok 5 Soap Color Combo Pack is a set of five non-toxic powder colours — matte violet, brown, orange, matte maroon and pink — made in India for colouring handmade soap and other craft projects. Each shade comes in a 15 gm pack, blends smoothly into your soap base, and gives an even, professional finish that is safe for skin when used at normal soap-making dosages.

What you get in the pack

This is a coordinated palette rather than five random tones. The matte violet and matte maroon give soft, earthy results; the pink is bright and cheerful; the orange is warm; and the brown is handy for wood, coffee or chocolate-themed bars. Together they cover a lot of ground for a beginner starter kit at ₹539, and you have enough of each to experiment across several batches.

  • Form: fine powder pigment
  • Shades: matte violet, brown, orange, matte maroon, pink
  • Quantity: 15 gm per colour, 5 colours
  • Made in: India
  • Shelf life: 2 years, stored cool and dry

What you can use it for

These powders are marketed as multipurpose colourants, so a single pack works across many hobbies:

  • Cold process and melt-and-pour soap: the main use, for solid single tones or swirls.
  • Bath bombs and cosmetic bars: small amounts give a gentle tint.
  • Resin jewellery and art: a pinch adds opaque colour to castings.
  • Arts, crafts and nail art: for accents, layering and detail work.

How to add colour to soap

Powder pigments dissolve better if you disperse them first instead of dumping them into the batch. A little preparation avoids streaks and specks.

  1. Pre-mix: take about 1 teaspoon of colour and blend it with 1 tablespoon of a light carrier oil (or glycerine for melt-and-pour) until smooth and lump-free.
  2. Start small: add the dispersed colour to your soap batter or melted base a little at a time. You can always add more.
  3. Blend well: stir or use a stick blender in short bursts so the pigment spreads evenly.
  4. Check the shade: soap often lightens as it cures, so aim slightly deeper than your target.

As a rough guide, roughly a quarter to half a teaspoon of powder per 500 gm of soap gives a noticeable colour, but always test on a small batch first because bases behave differently.

Tips for clean, even colour

  • Sift or crush any clumps before mixing so you don't get dark flecks.
  • For swirls, colour separate portions of batter and pour at light trace.
  • Keep a notebook of how much you used per batch so you can repeat a shade.
  • Matte tones (violet and maroon) read softer than glossy dyes — layer them for depth.
  • Work on a wiped surface; fine powders travel and can stain grout or cloth.

Safety and honest notes

These colours are described as non-toxic and skin-safe for soap and cosmetic use, but they are colourants, not food or medicine. A few sensible habits:

  • Do not eat them and keep the packs away from children and pets.
  • Avoid breathing in the loose powder — mix in a well-ventilated spot.
  • If you have sensitive skin, patch-test a finished, cured bar before regular use.
  • Use cosmetic-grade dosages; overloading colour can lead to bars that stain skin or washcloths.
  • Wear gloves if you dislike stained fingertips, especially with the darker shades.

Buying and storage

Buy powder colours in a combo like this when you are starting out or want a matched palette rather than one big jar of a single tone. Store each pack tightly closed in a cool, dry place away from direct sunlight and moisture, which keeps the pigment free-flowing for its stated two-year shelf life. Azlok lists this set among its candle- and soap-making supplies, so you can pair it with bases, moulds and fragrance oils in a single order.

FAQ

Are these soap colours safe for skin?

They are made from non-toxic ingredients intended for soap and cosmetic use, so they are suitable for handcrafted bars at normal dosages. As with any new product, patch-test a cured bar first if your skin is sensitive.

How much colour should I use per batch?

Start with roughly a quarter to half a teaspoon of pre-dispersed powder per 500 gm of soap, then adjust. Add gradually — it is easier to deepen a colour than to lighten it.

Can I mix the shades to make new colours?

Yes. Blending pink and violet, or orange and brown, lets you extend the five-colour palette. Note your ratios so you can reproduce a shade later.

Will the colour work in melt-and-pour and cold process soap?

Both. Disperse the powder in a little glycerine for melt-and-pour or in a light oil for cold process, then stir it evenly into the base.

Can I use it beyond soap making?

Yes — the pack is multipurpose and works for resin jewellery, nail art, and general arts and crafts, using small amounts at a time.

Related Tags

soap makingsoap colourdiy craftscosmetic colourresin artazlok

Featured Products

How to Colour Handmade Soap with the Azlok 5 Soap Color Combo Pack - Azlok Blog