Black Candle Color is a fine pigment powder used to tint candle wax a deep, even black. Add a small amount to your melted wax, stir it in thoroughly, and you get a rich black finish that stays put without bleeding. Azlok supplies it as a pure powder that starts out brownish in the pack and develops into a proper black once it is dispersed into wax.
What Black Candle Colour is used for
This is a colourant made specifically for candle making. Hobbyists and small candle businesses use it when they want that dramatic matte-black or glossy black look — think Halloween candles, gothic and minimalist décor, festive gifting, or contrast layers in pillar and container candles.
- Solid black candles — pillars, tapers, votives and container candles.
- Layered and marbled designs — black paired with white, gold or red.
- Themed and decorative candles for events and photography props.
Because it is a pigment powder rather than a dye, it gives strong coverage and an opaque colour. Do keep in mind that pigment powders can clog thin wicks over time, so they suit chunkier candles better than very fine wicked ones.
How to use it in candle making
A little goes a long way. Start small — you can always add more, but you cannot easily lighten an over-pigmented batch.
- Melt your wax (soy, paraffin or a blend) to the temperature recommended for your wax type.
- Take a pinch of Black Candle Color and dissolve it first in a little melted wax or a few drops of carrier to make a smooth paste. This avoids specks and undissolved clumps.
- Stir the paste into the main pot of melted wax and mix well for a minute or two until the colour is uniform.
- Do a spoon test: dip a spoon, let it set for a minute, and check the final shade — wax always looks darker when liquid.
- Add fragrance oil (if using), stir, then pour at your usual pouring temperature.
For a deep, true black you may need a slightly higher dose than you would for pastel shades. Increase gradually, testing as you go.
Tips for a clean, even black
- Disperse fully. Pigment powders need thorough mixing; poor stirring is the main cause of streaks and specks.
- Watch your wick. Because pigment is a solid particle, choose a wick a size up and test-burn before making a big batch.
- Mind the flame. Any candle with fragrance and colour should be burned on a heat-safe surface, away from drafts and flammables.
- Keep records. Note the grams of powder per kg of wax so you can repeat a shade exactly next time.
Safety notes
This is a colourant for candle making only. Please handle it sensibly:
- Not for eating or skin colouring. Do not ingest the powder and do not use it as a cosmetic, food or body colour.
- Avoid breathing the dust. Fine powder can become airborne — work in a ventilated space and consider a mask when scooping.
- Keep away from children and pets. Store it out of reach.
- Refer to the MSDS/COA for handling details, and wash hands after use.
Buying and storage
Azlok offers Black Candle Color in 50 g, 100 g, 500 g and 1 kg packs, priced from ₹199. If you are just starting out or testing shades, the 50 g pack is plenty, since dosage is small. Larger 500 g and 1 kg packs suit regular makers and small businesses producing in bulk.
Store the powder in a cool, dry place, tightly closed, away from moisture and direct sunlight. Kept properly, it has a shelf life of about 2 years. The product is made in India.
FAQ
Why does the powder look brown in the pack?
That is normal. The pigment appears brownish in its dry, packed form and develops into a proper black once it is dispersed and mixed into melted wax.
How much Black Candle Color should I add?
Start with a small pinch per batch, test on a spoon, and increase gradually until you reach a true black. Dosage varies with wax type and the depth of colour you want, so always test first.
Can I use it for soap or cosmetics?
No. This colourant is intended for candle making. It is not meant for skin, cosmetics or food use.
Will black pigment affect how the candle burns?
Pigment powders are solid particles that can clog thin wicks, so use a slightly larger wick and always do a test burn before scaling up a batch.
How do I avoid black specks in my finished candle?
Dissolve the powder into a little melted wax to make a smooth paste first, then stir it into the main pot thoroughly. Good dispersion prevents specks and streaks.