Azlok Green Soap Color is a green pigment powder used to tint handmade soap, giving shades from soft pastel mint to a deep matte forest green. It disperses in both oil and water, is non-bleeding and non-fading, and is made for cold process soap making. To use it, simply pre-mix a small amount into a little oil or your lye water before adding it to your batter.
What is Green Soap Color?
This is a mica-rich green pigment with the INCI name Phthalocyanine Green. It comes as a fine powder and is designed specifically for colouring soap. Because it is non-bleeding, the colour stays where you place it—useful for swirls, layers and patterns that don't muddy together over time. It is manufactured in India and has a shelf life of about two years when stored well.
Uses in soap and craft projects
- Cold process soap: its main use—produces even, long-lasting green tones.
- Melt-and-pour soap: can be used to colour clear or white soap bases.
- Layered and swirled bars: ideal because the pigment doesn't migrate.
- Whipped and embed designs: a small pinch adds crisp accents like leaves or borders.
By adjusting how much you add, the same powder can give you a delicate spa-green or a bold, earthy green that pairs nicely with herbal and forest-style fragrances.
How to use Green Soap Color
A little goes a long way. Start small and build up—you can always add more, but you cannot easily remove colour.
- Pre-disperse the powder. Mix about half a teaspoon of pigment into one tablespoon of a light liquid oil (such as sweet almond or your recipe oil). This avoids speckles and clumps.
- Blend smooth. Use a mini whisk or stick blender to break down any lumps until the slurry is even.
- Add at trace. Stir the dispersed colour into your soap batter at light trace, then blend gently until uniform.
- Adjust the depth. For pastel shades use less; for deep green add more of the pre-mixed slurry.
As a rough starting point, many soapers use around 1 teaspoon of pigment per 500 g of oils and tweak from there based on the shade they want.
Tips and safety notes
- Always wear a dust mask when handling fine pigment powder so you don't inhale it.
- Pre-dispersing in oil or glycerine gives far smoother results than adding dry powder directly.
- Test a small batch first—soap can shift shade slightly during cure, and other oils or additives can affect the final tone.
- Keep the powder and finished uncured soap away from children and pets.
- This is a cosmetic soap colorant, not a food colour. Do not eat it or add it to food.
- Wear gloves and old clothes; pigment can stain skin and surfaces temporarily.
Buying and storage
Azlok Green Soap Color is available in 100 g, 500 g, 1 kg and 5 kg packs, with the 100 g size priced at ₹359. The smaller pack suits home hobbyists testing shades, while the larger sizes work for small soap businesses making bulk batches. Store the powder in a cool, dry place with the lid firmly closed, away from direct sunlight and moisture. Kept this way, it holds its colour strength for roughly two years. If you sell your soaps, request the COA and MSDS so you have documentation for your ingredient records.
FAQ
How much Green Soap Color should I use per batch?
Begin with about 1 teaspoon of pigment per 500 g of oils, pre-mixed into a little oil. Use less for pastel green and more for a deep forest shade. Always test a small batch to confirm the tone.
Will the green colour fade or bleed over time?
No. This pigment is described as non-bleeding and non-fading, so it holds its shade and stays in place—which is why it works well for swirls and layered designs.
Can I use it in melt-and-pour soap too?
Yes. Although it is designed for cold process soap, it can also colour clear or white melt-and-pour bases. Pre-disperse it in a little oil or glycerine and stir in gradually.
Is Green Soap Color safe to eat or use in cosmetics on the face?
It is a soap colorant only. Do not ingest it. For any leave-on cosmetic use, always check that a colorant is approved for that specific application and follow the supplier's documentation.
Why does my soap have green speckles?
Speckles usually come from adding dry powder straight to the batter. Pre-mixing the pigment into oil and blending it smooth before adding it at trace solves this.