A 50 ml plastic beaker is a small, transparent, round-bottomed measuring cup used to portion out liquids and solids for DIY recipes and light lab work. It is ideal for candle making, soap making, skincare and haircare blends, and everyday kitchen measuring where you need accuracy in small amounts.
What you can make with a 50 ml beaker
The 50 ml size is the sweet spot for hobby projects that call for small, precise quantities. Because the beaker is transparent, you can watch the liquid level and check for clarity or colour as you work.
- Candle making: measure fragrance oils, dyes or small pours of melted wax before adding to a larger batch.
- Soap making: portion essential oils, fragrance oils, colourants and additives without guesswork.
- Skincare and haircare: blend serums, face oils, hair oils, toners and small cream batches.
- Baking and cooking: measure vanilla essence, food colour, syrups or milk for a single recipe.
- Craft and light lab use: mixing resin colourants, pigments or classroom experiments.
How to use it correctly
Getting an accurate measurement is simple once you follow a few habits.
- Place the beaker on a flat, level surface before pouring.
- Read the measurement at eye level, looking at the bottom of the curve (the meniscus) the liquid forms.
- Pour slowly as you near your target mark to avoid overshooting.
- For thick oils or syrups, tap the base gently so trapped air rises and the reading settles.
- When weighing solids, use the beaker on a kitchen scale and tare (zero) it first.
For DIY skincare and candle work, keep separate beakers for oils and for water-based ingredients. This reduces cross-contamination and makes measuring cleaner.
Safety and honest notes
Plastic beakers are convenient, but treat them sensibly.
- This beaker is made of standard plastic. Do not use it to boil liquids on direct heat or in a flame. For melting wax, use a proper double boiler and pour the measured amount separately.
- Very hot liquids can warp or damage plastic. Let melted wax cool slightly before measuring where possible, and avoid leaving it filled with hot contents for long.
- Avoid harsh solvents like acetone or strong acids, which can cloud or crack plastic. Glass is better for those.
- If you use a beaker for craft chemicals or fragrance oils, label it and do not reuse it for food afterwards.
- Keep small beakers away from young children, and never leave DIY ingredients within their reach.
Buying and storage tips
The Azlok 50 ml plastic beaker measures about 6 cm and comes in packs of 5, 10, 20 and 50, priced from ₹149. Buy in the quantity that matches how you work: a pack of 5 suits an occasional hobbyist, while 20 or 50 makes sense if you run a small candle or soap business and want a fresh beaker for each ingredient.
- Rinse immediately after use, especially with oils and fragrances, so residue does not set.
- Wash with warm (not boiling) water and mild dish soap; let them air-dry upside down.
- Store stacked in a dry drawer or box, away from direct sunlight, which can make plastic brittle over time.
- Keep a marker handy to label beakers by contents if you reuse them for the same recipe.
Because they are inexpensive and easy to replace, plastic beakers are a low-risk way to build a tidy, organised making station.
FAQ
Can I use a plastic beaker for hot melted wax?
You can measure warm wax briefly, but do not melt wax directly in it or fill it with very hot liquid for long periods, as heat can warp plastic. Melt wax in a double boiler and measure carefully.
Is a 50 ml beaker food safe?
Use it for food-grade measuring only if it has never held craft chemicals or fragrance oils. Once a beaker is used for non-food ingredients, keep it separate and do not switch it back to kitchen use.
How do I clean fragrance or oil residue?
Wipe out excess with a tissue first, then wash with warm water and dish soap. For stubborn fragrance, a little rubbing with soap and a soft brush usually clears it before air-drying.
What pack size should I buy?
Choose 5 or 10 beakers for casual hobby projects, and 20 or 50 if you make batches regularly and want a dedicated beaker for each oil, colour or additive.
Can it measure both liquids and solids?
Yes. Use the printed volume marks for liquids, and for solids place the beaker on a scale, tare it to zero, then add your ingredient.