Red Candle Color is a fine red pigment powder used to tint candle wax a bright, even shade of red. Add a small amount to your melted wax, stir it in thoroughly, and pour — that is essentially all it takes to move from plain wax to a rich, natural-looking red candle.
This pigment, sometimes listed under the older name ultramarine red, comes in pure powder form. It is popular in candle making because it disperses well and gives strong colour without needing large quantities. Azlok offers it in 50 gm, 100 gm, 500 gm and 1 kg packs, with pricing starting at ₹149, so both hobbyists and small candle businesses can pick a size that suits them.
What Red Candle Color is used for
The main use is straightforward: colouring candle wax. It works well across the batch sizes home makers usually deal with, and a little goes a long way. Common projects include:
- Festive and decorative pillar or container candles
- Valentine's Day and wedding candles
- Diwali and festival gifting sets
- Layered or ombré candles when combined with other shades
- Small-batch candles for craft stalls and online stores
How to use Red Candle Color
Because it is a concentrated pigment powder, start light and build up. You can always add more, but you cannot take colour out.
- Melt your wax to the temperature recommended for your wax type.
- Take a very small measure of the red powder — begin with roughly a pinch (about a quarter teaspoon) per 500 gm of wax.
- Add the pigment to the melted wax and stir slowly but thoroughly for a minute or two so it fully disperses.
- Check the shade by dropping a little wax onto a white saucer or paper; it dries a touch different from how it looks in the pot.
- Adjust with a tiny bit more powder if you want a deeper red, then pour into your prepared containers or moulds.
For the smoothest result, some makers pre-mix the powder with a small amount of melted wax or a compatible carrier to make a paste, then blend that into the main batch. This helps avoid tiny undissolved specks.
Tips for even, consistent colour
- Sieve if needed: If your powder has clumped, break it up before adding so you do not get dark flecks.
- Stir well: Under-mixing is the most common cause of streaky candles.
- Test small: Do a single test candle before committing a full batch, especially if you plan to sell.
- Keep records: Note how much powder you used per weight of wax so you can repeat a shade exactly next time.
- Layering: For gradient effects, pour cooler tinted layers in stages, letting each set slightly.
Safety notes
Pigment powders are fine and can drift in the air, so handle them sensibly.
- Work in a well-ventilated space and avoid breathing in the loose powder.
- Keep the pigment away from children and pets.
- This is a candle-making colourant, not a food or cosmetic colour — do not ingest it and do not use it on skin.
- Wear an apron and consider gloves, as the powder can stain surfaces and clothing.
- Follow standard hot-wax safety: use a double boiler, watch the temperature, and never leave melting wax unattended.
- Refer to the product COA and MSDS for detailed handling information.
Buying and storage
Pick your pack size by how often you make candles. A 50 gm or 100 gm pack lasts a hobbyist a long time because dosage is small, while 500 gm and 1 kg suit regular sellers. Store the powder in a cool, dry place with the lid tightly closed to keep moisture out. Kept this way, it has a shelf life of about two years. Azlok packs the product as per requirement, and the pigment is made in India.
FAQ
How much Red Candle Color should I add?
Start with about a pinch (roughly a quarter teaspoon) per 500 gm of wax, stir well, test the shade, and add a little more if you want it deeper. Dosage varies with wax type and the intensity you prefer.
Can I use this pigment in soy and paraffin wax?
Yes, it is intended as a candle colourant and can be used across common candle waxes. Always run a small test batch first, as different waxes take colour slightly differently.
Will the powder leave specks in my candle?
It can if it is not fully dispersed. Break up any clumps, mix it into a little melted wax first if you like, and stir the main batch thoroughly to avoid flecks.
Is Red Candle Color safe for skin or eating?
No. It is formulated for candle making only. Do not apply it to skin or consume it, and keep it out of reach of children.
How long does it last?
Stored in a cool, dry place with the container sealed, the pigment keeps for about two years.