

3D Hexa Poly Candle Mold
Minimum Order: 1 units
Description
The Azlok 3D Hexa Poly Candle Mold is a transparent poly-acrylic mold designed for casting hexagonal pillar candles at home. Mold dimensions are 5.3 cm × 9.2 cm, producing candles of approximately 4.5 cm × 7.5 cm and 89 g. Sturdy, reusable, and suitable for paraffin, soy, and beeswax candles.
History & Discovery
Candle molds have been used for centuries to produce uniform, decorative candles. Early molds were made from clay, wood, or metal. With the rise of DIY crafting and home décor culture in India, affordable reusable plastic and acrylic molds became popular, letting hobbyists and small businesses replicate professional-quality shapes at low cost. The hexagonal shape draws from honeycomb geometry and has become one of the most sought-after candle forms in modern decorative crafting.
Scientific & Medicinal Importance
Poly-acrylic (PMMA) is a thermoplastic known for its clarity, moderate heat resistance, and smooth surface finish. Candle waxes — paraffin, soy, or beeswax — are poured at temperatures typically between 60°C and 80°C; poly-acrylic molds can tolerate this range without warping when used correctly. The smooth interior surface of the mold allows for easy demoulding and produces a clean, glossy exterior on the finished candle. The hexagonal geometry of the mold maximises surface detail and gives the candle structural stability when standing upright.
Modern-Day Applications & Benefits
The Azlok 3D Hexa Poly Candle Mold is well suited for hobbyists, home-based candle businesses, and craft workshops. It works with paraffin wax, soy wax, beeswax, and gel wax. A mold release spray or a light coating of oil on the interior before pouring helps with clean demoulding. After each use, clean with warm (not boiling) water and a soft cloth; avoid abrasive scrubbers that can scratch the acrylic. Store away from direct sunlight to prevent yellowing over time. At ₹599 for one mold on Azlok, it is a cost-effective entry point for decorative pillar candle making.
Why Azlok's Version is Trusted Today
Azlok
Frequently asked questions
What wax types are compatible with this mold?
The 3D Hexa Poly Candle Mold works with paraffin wax, soy wax, beeswax, and gel wax. Pour wax at the recommended temperature (60–80°C) and avoid overheating, which can distort the acrylic.
What is the final candle size produced by this mold?
This mold produces a hexagonal pillar candle measuring approximately 4.5 cm in diameter and 7.5 cm in height, weighing around 89 g.
How do I remove the candle from the mold without breaking it?
Apply a light coat of mold release spray or vegetable oil inside the mold before pouring wax. Once the wax has fully cooled and set (allow at least 4–6 hours), gently flex the mold sides and push the candle out from the bottom.
Is this mold reusable, and how many times can it be used?
Yes, the poly-acrylic mold is reusable. With proper care — gentle cleaning, no abrasive tools, and pouring wax within the safe temperature range — it can be used many times. Longevity depends on handling and storage conditions.
Can I add fragrance oils or dyes to the wax used in this mold?
Yes, fragrance oils and candle dyes can be mixed into the wax before pouring. Ensure fragrance oil is candle-safe and added at the correct usage rate (typically 6–10% of wax weight). The transparent mold lets you see the colour of the wax as it sets.
Specifications
How to use 3D Hexa Poly Candle Mold
Guides covering uses, dilution, safety and storage.
