Azlok's 6 Cavity Rectangle + Round Flower Shaped Soap Mould Combo Pack is a two-mould silicone set that lets you cast six classic rectangular bars and six decorative flower-shaped soaps in one go. It is flexible, easy to unmould, simple to clean, and priced at ₹289 for a single combo pack, so it suits both first-time makers and people who already run a small handmade soap venture.
What you can make with this combo
Both moulds are made from premium-quality silicone, which means they are not limited to soap alone. The gentle flex of silicone releases most set materials without much fuss, so you can use the same trays for several craft projects.
- Cold-process and melt-and-pour soaps — the everyday use, giving you neat, uniform bars.
- Candles — pour soy or beeswax and add a wick once the wax begins to firm up.
- Sugar and salt scrubs — press solid scrub bars for a tidy, gift-ready finish.
- Resin crafts, bath bombs and small decorative castings — the flower shape works nicely for coasters and embeds.
Sizes and yield
Knowing the finished dimensions helps you plan your batch and buy the right amount of base.
- Rectangle mould: overall tray 19 x 20 x 2.5 cm; each bar roughly 8 x 5.5 x 2.4 cm and weighing about 80–90 g.
- Flower mould: overall tray 17 x 25 cm; each flower soap weighing about 105–110 g.
Between the two moulds you get twelve pieces per pour, which is a handy quantity for personal use, gifting, or a small market stall. The combo is also available as a 2-pack if you want to double your output in a single session.
How to use the moulds
- Place the mould on a flat, rigid tray or board so it stays level and is easy to move.
- Prepare your soap base — either melt a melt-and-pour block or complete your cold-process mix once it reaches trace.
- Pour slowly into each cavity, filling to just below the rim to avoid overflow.
- Tap the tray gently on the counter to release trapped air bubbles.
- Let it set fully. Melt-and-pour usually firms up in a few hours; cold-process bars need about 24–48 hours before unmoulding and then several weeks of curing.
- Flex the silicone and push from the base to pop each piece out cleanly.
Care, storage and safety tips
- Wash with warm water and mild dish soap after every use, then dry completely before storing to prevent residue build-up.
- Store flat or gently rolled in a cool, dry place, away from sharp objects that could nick the silicone.
- Avoid using sharp knives or metal scrapers inside the cavities, as they can scratch the surface.
- If you use the mould for candles or resin, keep those trays separate from any you use for soap or edible-style scrubs.
- Handling lye for cold-process soap requires gloves, eye protection and good ventilation — the mould is safe, but the raw ingredients are not. Keep all materials away from children and pets.
Buying notes
You can pick up this combo on Azlok as a single pack or a 2-pack depending on how much you make at a time. The set is made in India from silicone. Do note that colour is delivered as available — if your preferred shade is out of stock, an alternative colour mould will be sent, since the colour has no effect on how the mould performs.
FAQ
How many soaps does this combo pack make?
Each pour gives you 6 rectangular bars and 6 flower-shaped soaps — 12 pieces in total. Rectangular bars weigh around 80–90 g and flower soaps around 105–110 g.
Can I use these moulds for cold-process soap?
Yes. Silicone handles cold-process soap well. Allow 24–48 hours to set before unmoulding, then cure the bars for several weeks before use.
Is the mould only for soap?
No. The same silicone trays work for candles, sugar and salt scrub bars, bath bombs and resin crafts. Keep separate moulds for edible-style and non-edible projects.
How do I clean and store the moulds?
Wash with warm water and mild soap, dry fully, and store flat in a cool, dry spot away from sharp objects. Avoid cutting inside the cavities.
Will I get the colour shown in the listing?
The mould colour is sent based on stock availability. If your chosen colour is unavailable, an alternative colour is supplied, and it does not change how the mould works.